klipsch promedia 2.1 no sound one speaker

This isn’t surprising: a completely wireless system would require a transmitter at the source, a receiver at the base unit, an additional transmitter at the base for each speaker, and a separate receiver on each speaker. It doesn’t mean there are no wires between the ProMedia’s satellites and subwoofer, or that the system magically gets power without a power cable. Put simply, it means that there are no wires between your computer and the speaker system. Our news article about the ProMedia 2.1 Wireless are representative, many people are confused by exactly what the Wireless part of the system’s name really means.

When both wired and wireless audio sources are connected, the two signals are mixed. On the right-hand side of the module is a 1/8-inch headphone jack (which mutes the speakers’ output when headphones are connected) and a 1/8-inch auxiliary input for connecting a wired audio source.

On the front panel, near the bottom of the speaker, are the main volume control and a separate subwoofer-level control in between the two is a small, but nevertheless too-bright, power indicator. The right-hand satellite also hosts an integrated pre-amp module, which connects to the subwoofer using a separate-though also permanently attached-cable. WB-1 Wall Bracket Accessory for wall mounting.) Each satellite’s 10-foot cable is permanently attached in the rear. (You can remove this stand and replace it with the $22 Each satellite rests on a metal, non-adjustable stand that angles the speaker slightly upward toward the listener’s ears.

On the front of each speaker, behind a removable, mesh-and-plastic grille, you’ll find a 3-inch midrange driver and a 0.75-inch tweeter, the latter of which uses Klipsch’s (More on these latter two features in a moment.) Also on the back of the subwoofer is the system’s only power switch-like far too many otherĬomputer speakers we’ve tested, the ProMedia 2.1 requires you to crawl under your desk if you want to turn off the system to save energy.Įach of the ProMedia 2.1’s satellite speakers is approximately 8.5 inches tall, 4.2 inches wide, and 5.7 inches deep-fairly large for computer-speaker satellites. On the back of the subwoofer are standard spring-clip speaker terminals for connecting the satellites, a permanently attached power cable, a connection for the system’s pre-amp (control) module, and a Sync button for establishing a wireless connection.

Klipsch promedia 2.1 no sound one speaker